Electronics Workbench 64 Bit Windows 7 Download [BETTER]

Electronics Workbench 64 Bit Windows 7 Download [BETTER]

Download File > https://urluss.com/2tu53T

How to Download and Install Electronics Workbench on Windows 7 64-bit

Electronics Workbench is a popular circuit simulation software that allows you to design and test electronic circuits on your computer. It is a useful tool for students, hobbyists, and professionals who want to learn and experiment with electronics. However, Electronics Workbench is not compatible with Windows 7 64-bit by default. In this article, we will show you how to download and install Electronics Workbench on Windows 7 64-bit using a simple workaround.

Step 1: Download Electronics Workbench Multisim 11.0.1

The latest version of Electronics Workbench is Multisim 11.0.1, which was released in 2014. You can download it from this link [^1^]. This is a trial version that you can use for 30 days. If you want to use it longer, you will need to purchase a license from National Instruments, the developer of Multisim.

Step 2: Extract the downloaded file

After downloading the file, you will need to extract it using a software like WinRAR or 7-Zip. The file name is Electronic_Workbench_Multisim_11.0.1.rar and it has a size of 631 MB. To extract it, right-click on the file and select "Extract here" or "Extract to Electronic_Workbench_Multisim_11.0.1". You will need to enter the password "123" when prompted.

Step 3: Run the setup file

Once you have extracted the file, you will see a folder named Electronic_Workbench_Multisim_11.0.1. Open it and double-click on the setup file named setup.exe. This will launch the installation wizard of Multisim. Follow the instructions on the screen to complete the installation process.

Step 4: Apply the compatibility mode

After installing Multisim, you will need to apply the compatibility mode to make it work on Windows 7 64-bit. To do this, go to the folder where you installed Multisim (usually C:\Program Files (x86)\National Instruments\Circuit Design Suite 11.0) and find the file named multisim.exe. Right-click on it and select "Properties". Then, go to the "Compatibility" tab and check the box that says "Run this program in compatibility mode for". From the drop-down menu, select "Windows XP (Service Pack 3)". Click on "Apply" and then "OK".

Step 5: Enjoy Electronics Workbench

Now you are ready to use Electronics Workbench on your Windows 7 64-bit computer. You can launch it from the Start menu or from the desktop shortcut. You can create and simulate your own circuits using the various components and tools available in the software. You can also access online tutorials and examples from this link.

We hope this article was helpful for you. If you have any questions or feedback, please leave a comment below. a474f39169